Sani Coat kills and decomposes bacteria cells and it works even when the cells are covering the surface and while the bacteria are actively propagating. The end toxin produced at the death of the cell is also decomposed. Sani Coat does not deteriorate and it shows a long-term anti-bacterial effect. Disinfections by Sani Coat is 3X stronger than chlorine and 1.5X stronger than ozone.
Sani Coat accelerates the breakdown of any VOCs by destroying the molecular bonds. This combines the organic gases to form a single molecule that is safe for humans thus enhancing the air cleaning efficiency
Air Purifying Effect
Sani Coat purifies the air by reducing or eliminating polluted compounds in the air. Atmospheric constituents such as chlorofluorocarbons (CFCs) and CFC substitutes, greenhouse gases, and nitrogenous and sulfurous compounds undergo photochemical reactions either directly or indirectly in the presence of sunlight. In a polluted area, these pollutants can eventually be removed.
Sani Coat is self-cleaning. Most of the exterior walls of buildings become soiled from automotive exhaust fumes, which contain oily components. When the original building materials are coated, a protective film cleans the building by becoming antistatic, super oxidative, and hydrophilic. The hydrocarbon from the automotive exhaust is oxidized and the dirt on the walls washes away with rainfall, keeping the building exterior clean at all times.
Staphylococcus Aureus test: Sani Coat (left) / Antimicrobial paint (right) Result for Sani Coat : 1.5*108CFU -> 7.8*105CFU -> 2.3*104CFU
E. coli bacteria on the surface of the Sani Coat were examined with a fluorescent
microscope after being coloured by acridine orange. The remaining E. coli are coloured in orange.
Photocatalysis of three different bacteria on a Sani Coat coated surface
Photocatalytic inactivation efficiency against E. coli K-12 (2 × 107 CFU/mL, 50 mL) in the presence of Sani Coat (100 mg/L) under VL irradiation.
Recommended dosage during application :
For a full range of effectiveness and durability, 100 – 200 ml/m2 of undiluted Sani Coat per layer with 2 layers per application are necessary. This amount can vary depending on the application method. Always test on an inconspicuous area to
determine actual usage +consumption
SECTORS THAT FREQUENTLY REQUIRE
DISINFECTIONS & SANITATION